Technical Data Sheet ## Water-based baking type metallic top coat (gray) Water-based Metal Paint · Category: Metal paint General-purpose water-based paint for metal surfaces. Easy application, good durability, and broad color range for industrial and architectural metalwork. ## Key Features Direct-to-metal application Good corrosion resistance Water-based, low odor, fast drying Wide color and gloss range Suitable for shop and field ## Typical Applications Metal furnitureFencingDecorative metalworkHVACGeneral metal ## Technical Specifications TypeWater-based acrylicColorCustomSolid content≥ 45%Dry to touch≤ 30 min @ 25°CSalt spray≥ 200hAdhesionGrade 1VOC< 50 g/LCoverage8-10 m²/kg @ 30μm DFT ## Application Notes Surface preparation: Remove all oil, grease, dirt, and loose rust. Abrasive blast to Sa 2½ (ISO 8501-1) for best results, or power tool clean to St 3 minimum. Apply on dry surface with substrate temperature at least 3°C above dew point. Mixing: Stir component A thoroughly, then add component B (if applicable) in the correct ratio. Mix with mechanical stirrer for 3 minutes until uniform. Pot life varies by product, typically 2 hours at 25°C. Application: Airless spray is recommended for best results. Brush or roller suitable for small areas and touch-up. Apply in even, wet coats to specified DFT. Do not exceed recommended film thickness to avoid sagging. ## Storage & Safety Store in original sealed container between 5-35°C, away from direct sunlight an