Technical Data Sheet ## PP water-based paint Water-based Industrial Coating · Category: Plastic parts PP water-based paint — high-performance water-based industrial coating manufactured by SGTECH Coatings. Designed for demanding industrial applications requiring balanced corrosion protection, environmental compliance, and ease of application. ## Key Features Water-based, low VOC (< 80 g/L) Excellent adhesion and durability 240h+ salt spray resistance Compatible with primer systems Custom colors available ## Typical Applications General steelIndustrial equipmentStructural steelMachineryOEM ## Technical Specifications TypeWater-based industrial coatingColorCustomSolid content≥ 50%DFT30-80μm typicalSalt spray≥ 240hAdhesionGrade 0-1VOC< 80 g/LCoverage8-10 m²/kg @ 40μm DFT ## Application Notes Surface preparation: Remove all oil, grease, dirt, and loose rust. Abrasive blast to Sa 2½ (ISO 8501-1) for best results, or power tool clean to St 3 minimum. Apply on dry surface with substrate temperature at least 3°C above dew point. Mixing: Stir component A thoroughly, then add component B (if applicable) in the correct ratio. Mix with mechanical stirrer for 3 minutes until uniform. Pot life varies by product, typically 2 hours at 25°C. Application: Airless spray is recommended for best results. Brush or roller suitable for small areas and touch-up. Apply in even, wet coats to specified DFT. Do not exceed recommended film thickness to avoid sagging. ## Storage & Safe