Technical Data Sheet

Water-Based Iron Fence & Railing Paint

Water-based Decorative & Protective Coating · Category: Iron Fence & Railing

Water-based coating for wrought iron fences, railings, gates, and decorative metalwork. Excellent weather resistance, adhesion, and anti-corrosion performance for outdoor iron structuresh-end appearance and durability.

Key Features

High gloss and mirror finish Excellent weathering and UV resistance Strong adhesion on metal and plastic Water-based, low VOC UV and weather resistant for outdoor use

Typical Applications

Wrought iron fences
Railings & balustrades
Gates & decorative metalwork
Outdoor iron furniture
Garden ornaments

Technical Specifications

Type
Water-based acrylic
Color
Custom color matching
Gloss≥ 90 @ 60°
Solid content≥ 50%
Hardness≥ H (pencil)Adhesion
Grade 0VOC< 80 g/L
Coverage8-12 m²/kg @ 30μm DFT

Application Notes

Surface preparation: Remove all oil, grease, dirt, and loose rust. Abrasive blast to Sa 2½ (ISO 8501-1) for best results, or power tool clean to St 3 minimum. Apply on dry surface with substrate temperature at least 3°C above dew point.

Mixing: Stir component A thoroughly, then add component B (if applicable) in the correct ratio. Mix with mechanical stirrer for 3 minutes until uniform. Pot life varies by product, typically 2 hours at 25°C.

Application: Airless spray is recommended for best results. Brush or roller suitable for small areas and touch-up. Apply in even, wet coats to specified DFT. Do not exceed recommended film thickness to avoid sagging.

Storage & Safety